Installing A Tape Drive - Fujitsu PRIMERGY RX600 S3 Options Manual

Installing a tape drive

Accessible drives
7.2 Installing a tape drive
A tape drive can be installed in the bay in the middle of the server. If no device
is installed in the bay, it contains only the module frame.
Removing the module frame
Ê Open the server as described in chapter "Preparation" on page 23f.
Figure 33: Removing the module frame
Ê Press the two blue points on the spring clips on the module frame and push
the module frame forward out of the server.
50 Options Guide RX600 S3
U41640-J-Z156-2-76