Installing A Tape Drive - Fujitsu PRIMERGY RX600 S4 Options Manual

Accessible drives
7.2

Installing a tape drive

A tape drive can be installed in the bay in the middle of the server. If no device
is installed in the bay, it contains only the module frame.
Removing the module frame
Ê Open the server as described in the
A
Figure 19: Removing the module frame
Ê Press the two blue points on the spring clips on the module frame (A) and
push the module frame forward out of the server (B).
RX600 S4
chapter "Preparation" on page
B
Options Guide
Installing a tape drive
17f.
A
35