Connecting The Power Cable - Fujitsu ETERNUS CS800 S5 User Manual

Handling Instructions for the Rack
Hold the slider by the handle and pull it out as far as it will go.
●
Screw out the leveling feet using a 6 mm Allen key (or manually by turning the
●
hexagonal disc) until they are pressing against the floor.
V
Sliding in the tilting protection
V
Follow the procedure described under "Extracting the tilting protection" in reverse order.
●

Connecting the Power Cable

Connect the rack's socket strip to the inhouse supply network.
92
CAUTION!
Do not close the rack door when the tilting protection is extracted, as the door may
be damaged.
CAUTION!
Before you slide in the tilting protection, screw the leveling feet back up into their
original position.
Installing the Rack
U41840-J-Z125-7-76