Voice Memo; Hide Zones - Abus Secvest User Manual

10.2 Voice memo

10. User menu
This function is used to leave someone else a message ("Memo function").
Record a short reminder, for example, and then arm the system. The next person
to disarm the system is notifi ed with the text "You have a message" and
a corresponding symbol. Select "Recording" to record a 30-second message and
then save it. Any user can delete this message aft er it has been played back. This
function can be completely disabled in consultation with the specialist
installation contractor.
10.3 Hiding zones
It may occasionally be necessary to exclude a detector (also called a "zone")
from monitoring, for example if a detector is faulty or a zone cannot be closed
for some reason. The system then indicates the detectors that can be hidden.
The settings mean: Ü = monitored and G = locked (not monitored). Select the
detector to be hidden and press "Change". Note that detectors to be hidden
manually must fi rst be confi gured for this function by the specialist installation
contractor. For this reason not all of the detectors in the system may appear in
the list of detectors which can be hidden if this has been set up that way
beforehand. If detectors are hidden, they are no longer monitored when the
alarm panel is armed. A hidden detector is "unhidden" the next time the system
is disarmed and must be hidden again manually to be excluded from monitoring
the next time the system is armed, if desired.
Using the web interface, it is also possible to hide zones. This requires selecting
the "Hide zones" button, which will open a list of all the zones which can be
hidden.
26 | 27