Exiting The User Menu; Options In The User Menu; Option 1: Omit Zones; Option 2: Shunting 24Hr Zones - Abus Terxon LX Administration Manual

User Menu
1: Omit Zones
0002 is Armed
User Menu
2:Shunt 24hr Zns
1=Shunt 24hr
2=Reinstate 24hr
Shunt partitions
Ptns > 1*......

1.4. Exiting the user menu

To return to the normal display, press
menus step by step until the time and date are displayed.

2. Options in the user menu

2.1. Option 1: Omit Zones

You may want to exclude some zones before activating the system. For example,
one room still needs to be used while the rest of the system is activated. This
option allows you to select zones you want to exclude.
Important: ...................................................................................................................
If the system is deactivated, the settings made are deleted. This prevents
zones from being omitted accidentally.
Important: ...................................................................................................................
You can only omit zones that have been set up as omittable (see Installation
Instructions, Option 11).
1. Press to open the "Omit Zones "menu.
2. Press the
the 4-digit zone number (please see "Zone Numbers" on page 16 for
details of numbering).
3. Press to change the state of the zone (omitted means that the zone
will be omitted).
4. Press to change to the next zone, or

2.2. Option 2: Shunting 24hr Zones

This option allows you to isolate all 24-hour zones in specific partitions. The zones
are then permanently excluded from system monitoring. However, these zones
must have the "Isolate" attribute (see Installation Instructions, Option 11).
Important: ...................................................................................................................
Zones remain shunted until you use the Reinstate 24hr option (see below).
Important: ...................................................................................................................
Reinstating Zones may start the exit timer, depending on the selected setting,
which can be "Unshunt", "No Exit" or "Unshunt & Exit" (see Installation
Instructions, Option 45).
1. Press to select Shunt 24-hr Zns.
2. Press 1 to shunt zones or 2 to reinstate shunted zones.
3. Press the number keys to select the partitions you want to shunt or
reinstate, and confirm with
shunted/reinstated. (A "*" means that the partition will not be
shunted/reinstated, and "." means that you have no access to this partition.)
repeatedly to jump back through the
and keys or select the zone to be isolated by entering
. Every displayed partition is now
Administration Manual – Terxon L
to exit the menu.
3