Detectors; Door And Window Contacts; Infrared Sensitivity Detector - Abus Terxon MX Installation Instructions Manual

Intruder alarm panel

Hide thumbs Also See for Terxon MX:

Table of Contents

Detectors

Door and window contacts monitor the opening of doors

and windows. To activate the entry/exit delay time, at least

one contact should be mounted on the main entrance

door on which a control unit is also mounted.

For transparency reasons, no more than ten door/window

contacts should be used per alarm zone. If the magnet of

the reed contact of the detector is removed, the switch

contact is opened and the alarm zone is interrupted.

Please read the instructions for your door/window

Connection example:

Infrared sensitivity detectors detect the infrared heat

movement of living creatures and must not be used

indoors. For transparency reasons, avoid using motion

sensors with door/window contacts in a zone.

Connection example:

Table of Contents