Table of Contents
Advertisement
B-38 Installing the Operating System
Storage and I/O Blade AD106a Driver
When the system is Windows Server 2008 64-bit (x64) Edition / Windows
Server 2008 32-bit (x86) Edition
If you use the Storage and I/O Blade AD106a, you do not need to install the Internal RAID
Controller driver manually. It is automatically installed by Windows Plug-and-Play.
When the system is Windows Server 2003 x64 Editions / Windows Server
2003
If you use the Storage and I/O Blade AD106a, update your system with NEC EXPRESSBUILDER
DVD attached to your system.
The Internal RAID Controller driver will be installed automatically.
Optional Network Board Driver
To use an optional Network Board (N8403-017/020/021/022), install the driver stored in NEC
EXPRESSBUILDER DVD.
In case of utilizing (N8403-017/020/021/022) for Windows Server 2008 64-bit (x64) Edition /
Windows Server 2008 32-bit (x86) Edition
LAN drivers are installed automatically by the System Update.
In case of utilizing (N8403-017/020/021/022) for Windows Server 2003 x64 Editions
"DVD-ROM Drive Letter:\003\win\winnt\w2k3amd\ma21\pro1000\winx64"
In case of utilizing (N8403-017/020/021/022) for Windows Server 2003
"DVD-ROM Drive Letter:\003\win\winnt\dotnet\ma21\pro1000\win32"
If the procedure of installation is not clear, refer to the installation procedure described in the
section "Installation of the Optional Network Board Driver".
Installation of the Optional Network Board Driver
When the system is Windows Server 2008 64-bit (x64) Edition / Windows Server 2008
32-bit (x86) Edition
LAN drivers are installed automatically by the System Update.
Advertisement
Table of Contents
