Installation Of The Optional Network Board Driver - NEC Express5800/R140a-4 User Manual

Optional Network Board Driver (N8104-121/125/126/123A)
If you want to utilize optional Network Board (N8104-121/125/126/123A), install the driver stored
in NEC EXPRESSBUILDER DVD.
In case of utilizing (N8104-121/125/126)
\001\win\winnt\dotnet\dl3\pro1000\win32
If the procedure of installation is not clear, refer to the installation procedure described in the
section "Installation of the Optional Network Board Driver".
In case of utilizing (N8104-123A)
Please refer to the installation manual provided with the board.

Installation of the Optional Network Board Driver

1.
Start Device Manager.
2.
Click [Network adapters] and double-click [(Network Adapter Name)].
[(Network Adapter Name) Properties] appears.
NOTE: [(Intel(R) PRO/1000...)] is the name of On-Board adapter. All
other names show the Optional Network Board.
3.
Click [Driver] tab and click [Update Driver...].
[Hardware Update Wizard] appears.
4.
Select the [Install from a list or specific location(Advanced)] radio button and click
[Next].
5.
Select the [Search for the best driver in these locations] radio button and check off the
[Search removable media (floppy, CD-ROM...)] check box.
6.
Check the [Include this location in the search] check box and when using [N8104-
121/125/126)], specify [\001\win\winnt\dotnet\dl3\pro1000\win32].
Then click [Next].
7.
Click [Finish].
Installing the Operating System with Express Setup 5-23