Optional Network Board Driver; Installation Of The Optional Network Board Driver - NEC N8100-1447F User Manual

Optional Network Board Driver

If you want to utilize optional Network Board (N8104-112/119/111/120/121/125/126), the network
driver will be installed automatically. Therefore, the driver attached to the Network board should not
be used.
If you want to utilize optional Network Board, install the driver stored in NEC EXPRESSBUILDER
DVD.
In case of utilizing (N8104-111)
"\006\win\winnt\dotnet\dl3\pro100\win32"
In case of utilizing (N8104-112/119/120/121/125/126)
"\006\win\winnt\dotnet\dl3\pro1000\win32"

Installation of the Optional Network Board Driver

1.
Start Device Manager.
2.
Click [Network adapters] and Double-click [(Network Adapter Name)].
[(Network Adapter Name) Properties] appears.
NOTE: [(Intel(R) PRO/1000...)] is the name of On-Board adapter. All
other names show the Optional Network Board.
3.
Click [Driver] tab and click [Update Driver...]. [Hardware Update Wizard] appears.
4.
Select the [Install from a list or specific location(Advanced)] radio button and click
[Next].
5.
Select the [Search for the best driver in these locations] radio button and check off the
[Search removable media (floppy, CD-ROM...)] check box.
6.
Check the [Include this location in the search] check box and when using [(N8104-111)],
specify
[\006\win\winnt\dotnet\dl3\pro100\win32].
Then click [Next].
When using [(N8104-112/119/120/121/125/126)], specify
[\006\win\winnt\dotnet\dl3\pro1000\win32].
Then click [Next].
7.
Click [Finish].
Installing the Operating System with Express Setup 5-25