Table 12-3. Interface Configuration Fields - Comtech EF Data CIM-550 Installation And Operation Manual

CiM-550 IP Enabled Satellite Modem
Web Server Pages
12.3.6.1 I
NTERFACE
This page is used to configure both the Ethernet (LAN) and Satellite (WAN) interfaces.
In addition, control of Baud Rate and Character Format for the both the 'Remote Control
B' port and the 'Console' Port are provided on this page.
Field
Ethernet MAC Address
Ethernet Mode & Speed
Ethernet IP Address and
Mask
C
ONFIGURATION

Table 12-3. Interface Configuration Fields

Description
The Ethernet MAC address is a unique number assigned by the
factory during assembly of the CiM. This is a read-only parameter.
The Ethernet Mode & Speed selection defines the type of Ethernet
connection being made to the CiM. The possible selections are:
Auto
10 MB/sec Half Duplex
100 MB/sec Half Duplex
10 MB/sec Full Duplex
100 MB/sec Full Duplex
Specifies the IP Address and Network Mask of the CiM
185
Rev. 2
CD/CIM550.IOM