Table 13-33. Remote Port B Configuration Subgroup Oids - Comtech EF Data CIM-550 Installation And Operation Manual

CiM-550 IP Enabled Satellite Modem
SNMP interface
13.4.2.6.1 Remote Port B Configuration Subgroup
This subgroup defines the Remote Port B configuration.
OID
cimRemotePortBDeviceAddress
cimRemotePortBBaudRate
cimRemotePortBFormat
cimRemotePortBInterface

Table 13-33. Remote Port B Configuration Subgroup OIDs

Description
Defines the device address. Valid addresses are in
the range from 0 to 9999.
Defines the speed of the serial interface.
Can be set to:
1 1200
2 2400
3 4800
4 9600
5 19200
6 38400
Supports three configurations for the Remote Port B
interface. Each format defines a triple that describes
the data bits, parity, and stop bits.
Can be set to:
1 8-N-1 (8 data bits, no parity, 1 stop bit)
2 7-E-2 (7 data bits, even parity, 2 stop bits)
3 7-O-2 (7 data bits, odd parity, 2 stop bits)
Configures the UART to operate in one of three types
of physical EIA-xxx interfaces {EIA-232, EIA-485, EIA-
485-4W}.
The OID can be set to:
1 EIA-232
2 EIA-485 2W
3 EIA-485 4W
243
Rev. 2
CD/CIM550.IOM