Table of Contents
Advertisement
CiM-550 IP Enabled Satellite Modem
CLI and Telnet Interface
11.2.1.3 A
CCESS
The Access Lists page is activated from the Administration page. This page allows the
operator to configure the CiM to limit monitor and control access to the unit from a
specified list of authorized clients.
Note:
The Access Lists page contains the following options/fields:
Menu Options/Fields
AccessClient1 - 4
Access List
Enforcement
Save Parameters
Exit
L
P
ISTS
AGE
If connecting to the CiM remotely, the IP address of the machine used to manage the
CiM should be included in the Access List.
Entry
1 - 4
E
S
X
Description
The Access Client list allows an operator to define which
remote clients can connect to a CiM when the Access List
Enforcement is enabled. Each entry allows an operator to
specify an IP Address and a subnet mask to define a unique
class of machines that are allowed access to the CiM.
For example, if an operator wanted to grant access to a PC
with an IP Address of 10.10.10.1 and any PC on a subnet of
192.168.10.xxx, then the Access List would be defined as:
AccessClient1 ...[10.10.10.1/32]
AccessClient2....[192.168.10.0/24]
The Access List Enforcement allows an operator to grant
access to the CiM via ping, telnet, HTML, FTP, and SNMP
to a well-defined list of client machines.
Access List Enforcement toggles between [Enabled] and
[Disabled].If disabled, then any client machine will able to
connect to the CiM via ping, telnet, HTML, FTP, and SNMP.
If enabled, then only those machines specified in the Access
Client List will be allowed to connect to the CiM via ping, telnet,
HTML, and SNMP.
This option allows a user to save the current configuration of
the CiM to permanent storage. This configuration will be
restored on each successive power cycle of the CiM.
This option allows a user to exit the current menu and return
to its parent menu.
121
Rev. 2
CD/CIM550.IOM
Advertisement
Table of Contents
