Table 13-39. Interface Parameters Oids; Table 13-40. Utility Parameters Oids - Comtech EF Data CIM-550 Installation And Operation Manual

CiM-550 IP Enabled Satellite Modem
SNMP interface
OID
cim550RxClockMode
cim550RxBufferSize
cim550RxAcqSweepRange
cim550RxEbnoAlarmPoint
13.5.1.4 I
NTERFACE
OID
cim550IfImpedance
cim550InterfaceType
13.5.1.5 U P
TILITY
OID
cim550UnitFramingMode
P
ARAMETERS

Table 13-39. Interface Parameters OIDs

ARAMETERS

Table 13-40. Utility Parameters OIDs

Description
Receive clock mode. Can be set to:
0 Disabled
1 Enabled
Receive buffer size in bits. Can be set to:
1 256 bits
2 512 bits
3 1024 bits
4 2048 bits
5 4096 bits
Receive +/- acquisition sweep range of deomulation in KHz.
Can be set between 1 and 30.
Receive Eb/No alarm point in dB. Can be set between 0
and 160 in 0.1 dB where (0=0.0 dB to 160=16.0 dB).
Description
IF interface impedance. Can be set to:
5 50 Ohm
7 75 Ohm
Unit interface type. Can only be set to IP.
4 IP
Description
Unit framing mode. Can be set to:
0 Unframed
1 Framed
250
Rev. 2
CD/CIM550.IOM