Table of Contents
Advertisement
CiM-550 IP Enabled Satellite Modem
Front Panel Menus
4.1.5.2.4 SELECT\CONFIG\INTFC
DATA INTERFACE:
422/530
V.35
EDIT THIS UNIT'S ADDRESS
0245 (SEE HANDBOOK)(ENT)
DISPLAY
EIA-
EIA-232
IP (ENTER)
EDIT UNIT'S IP ADDRESS:
010.006.007.224/16 (ENT)
(FRAMED/ON) EDMAC SLAVE
The valid range of addresses is
from 1 to 9999, although 'base 10'
values will be automatically
skipped.
Remember that this is a unit which
is intended to be located at the
distant-end of a link, and will
therefore be under the control of a
MASTER at the other end. This is
the equivalent of putting the unit
into Remote Control mode - no local
control is possible.
SELECTIONS/DESCRIPTION
EIA-422/530
V.35
EIA-232
IP
Note: Selecting either EIA-422/530, V.35, or EIA-
232 as the interface rather than IP will
change the CiM-550 to CDM-550 emulation
mode. The CiM-550 will then pass standard
serial traffic, like a CDM-550, but will not
pass IP traffic. The CiM can still be
accessed via the ethernet port using Telnet,
HTTP, or SNMP.
If the user selects IP, the following screen is
displayed:
38
Rev. 2
CD/CIM550.IOM
Advertisement
Table of Contents
