Comtech EF Data CIM-550 Installation And Operation Manual page 102

CiM-550 IP Enabled Satellite Modem
Remote Control
Parameter Command Arguments for
Command or
Type (Instruction
Response to
Code and
Query
qualifier)
Retrieve N/A 2 bytes,
Number of numerical
unread
Stored
Events
Retrieve N/A 130 bytes
next 5
unread
Stored
Statistics
Retrieve N/A 3 bytes,
Number of numerical
unread
Stored
Statistics
Description of arguments
(note that all arguments are ASCII numeric
codes, that is, ASCII codes between 48 and 57)
than 5 events to be retrieved, the remaining
positions are padded with zeros.
Query only.
Unit returns the number of Stored Events which
remain unread, in the form xx. Note: This means
unread over the remote control - viewing the stored
events from the front panel of the modem does not
affect this value. Example reply: NUE=98
Query only
Unit returns the oldest 5 Stored Statistics which
have not yet been read over the remote control.
Reply format:
{CR}Sub-body{CR}Sub-body{CR}Sub-body{CR}Su
b-body{CR}Sub-body, where Sub-body=
AA.ABB.BC.CD.Dddmmyyhhmmss,
AA.A = Minimum Eb/No during sample period.
BB.B = Average Eb/No during sample period.
C.C = Max. Tx Power Level Increase during
sample period.
D.D = Average Tx Power Level Increase during
sample period.
ddmmyyhhmmss = date/time stamp.
If there are no new events, the unit replies with
RNS? If there are less than 5 statistics to be
retrieved, the remaining positions are padded with
zeros.
Query only.
Unit returns the number of Stored Statistics which
remain unread, in the form xxx. Note: This means
unread over the remote control - viewing the stored
events from the front panel of the modem does not
76
Response to Command Query
(target to controller)
(Instruction
Code and
qualifier)
N/A NUE?
N/A RNS?
N/A NUS?
Rev. 2
CD/CIM550.IOM
Response to
query
(target to
controller)
NUE=xx (see
description for
details of
arguments)
RNS={CR}AA.A
BB.BC.CD.Ddd
mmyyhhmmss{
CR}AA.ABB.BC
.CD.Dddmmyyh
hmmss{CR}AA.
ABB.BC.CD.Dd
dmmyyhhmmss
{CR}AA.ABB.B
C.CD.Dddmmyy
hhmmss{CR}AA
.ABB.BC.CD.Dd
dmmyyhhmmss
(see description
for details of
arguments)
NUS=xxx (see
description for
details of
arguments)