Table of Contents
Advertisement
CiM-550 IP Enabled Satellite Modem
CLI and Telnet Interface
11.2.2.1 F
E
AST
THERNET
The Fast Ethernet Interface page is activated from the Interface Configuration page.
The Fast Ethernet Interface page contains the following options/fields:
Menu Options/Fields
MAC Address
Speed/Mode
IP Address
Subnet Prefix Length
Save Parameters
Exit
I
(
0) P
NTERFACE
FEI
Entry
Description
Read
The MAC Address defines the hardware destination MAC
Only
Address that is used when an Ethernet packet is destined
for the CiM Ethernet Interface. This address is unique and
has been assigned permanently at the factory.
E
The Ethernet Speed Mode is a configurable parameter of
the CiM and thus its exact setting can very between
specific installations. The default setting allows the
Ethernet port to auto negotiate its link speed on power-up.
Selections are:
1 -- Auto
2 -- 10 MB/sec Half Duplex
3 -- 100 MB/sec Half Duplex
4 -- 10 MB/sec Full Duplex
5 -- 100 MB/sec Full Duplex
I
This is the IP Address assigned the CiM Ethernet
Interface.
Enter the ip address in aaa.bbb.ccc.ddd format
M
Specifies the Subnet Mask assigned to the Ethernet
Interface of the CiM.
Enter the subnet mask prefix length (8..30)
S
This option allows a user to save the current configuration
of the CiM to permanent storage. This configuration will be
restored on each successive power cycle of the CiM.
X
This option allows a user to exit the current menu and
return to its parent menu.
131
AGE
Rev. 2
CD/CIM550.IOM
Advertisement
Table of Contents
