Comtech EF Data CIM-550 Installation And Operation Manual page 154

CiM-550 IP Enabled Satellite Modem
CLI and Telnet Interface
11.2.1.7 SNMP
The SNMP Configuration page is activated from the Administration page.
The SNMP Configuration contains the following options/fields:
Menu Options/Fields
SNMP Admin Get/Set
Community
SNMP Read Write Get/Set
Community
SNMP Read Only Get/Set
Community
SNMP Trap Destination
SNMP Trap Community
SNMP trap Version
SNMP Enable
Authentication Trap
Entry Description
Read GET and SET community string for Admin user. This
Only community string allows GET/SET operations to all
portions of the cimController and cim550 MIBs.
Read GET and SET community string for Read Write user.
Only This community string allows GET/SET operations to
all portions of the cimController and cim550 MIBs,
except for the cimAdministration section in the
cimController MIB.
Read GET and SET community string for Read Only user.
Only This community string allows GET operations in the
cim550 MIB only.
T IP address where all traps/notifications will be sent. If
a network management application is running in the
network, it should be configured to receive traps and its
IP address should be entered here.
C Community string which will be set in the Community
field of all outgoing traps. This field on the trap PDU
may be checked by the network manager application to
determine if the trap came from a "trusted" agent.
V Determines whether a SNMPv1 trap or SMNPv2
notification is sent.
Determines whether a MIB2 authentication trap will be
A
sent when a PDU with an invalid community string is
encountered. A community string is invalid when it
does not match the Admin, the Read Write, or the
Read Only community strings.
128
Rev. 2
CD/CIM550.IOM