Table of Contents
Advertisement
CiM-550 IP Enabled Satellite Modem
SNMP interface
13.5.1.6 T
""AUPC P
HE
OID
cim550AupcEnable
cim550AupcControlParameters
cim550RemoteEbno
cim550TxPowerLevelIncrease
ARAMETERS
Table 13-41. AUPC Parameter OIDs
Description
Enables or disables AUPC (Automatic Uplink Power
Control). Can be set to:
Defines AUPC (Automatic Uplink Power Control)
operating parameters. Has the form abc.cd Where: a =
Define action on max power condition: 0 = do nothing 1
= generate TX alarm b = Define action on remote
demod unlock: 0 = go to nominal power 1 = go to max
power c.c = Target Eb/No value, in dB, for remote
demod d = Maximum increase in Tx Power permitted, in
dB
Returns the value of Ebi/No of the remote demod, if
Framing is enabled. Returns 999 if demod is unlocked.
Returns -1 if Framing is not enabled. Ebi/No values can
be between 20 and 60 in 0.1 dBs where 20=2.0 dB to
160=16.0 dB.
Returns the increase in Tx power level, in dB (from the
nominal setting) due to the action of AUPC. Returns –1
if AUPC is not enabled. Values can be between 0 and
90 in 0.1 dBm where 0 = 0.0 dBm to 90 = 9.0 dBm
0
Disable
1
Enable
252
Rev. 2
CD/CIM550.IOM
Advertisement
Table of Contents
