Display Ipv6 Interface - HP 6125XLG Command Reference Manual

Input: bad code
checksum error
path MTU changed
too big
echo request
neighbor solicit
router solicit
redirect
output: parameter problem
echo reply
unreachable admin
unreachable address
too big
time exceed reassembly 0
ratelimited

display ipv6 interface

Use display ipv6 interface to display IPv6 interface information.
Syntax
display ipv6 interface [ interface-type [ interface-number ] ] [ brief ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface-type: Interface type.
interface-number: Interface number.
brief: Displays brief information.
Usage guidelines
If you specify the brief keyword, this command displays brief information including physical status,
link-layer protocols, and IPv6 address.
If you do not specify the brief keyword, this command displays detailed information including IPv6
configuration and operating information, and IPv6 packet statistics.
If you do not specify any interface, this command displays IPv6 information about all interfaces.
If you specify only interface-type, this command displays IPv6 information about the interfaces of the
specified type.
If you specify interface-type interface-number, this command displays IPv6 information about the
specified interface.
Examples
# Display IPv6 information about VLAN-interface 2.
0 too short
0 bad length
0 destination unreachable
0 parameter problem
0 echo reply
0 neighbor advertisement
0 router advertisement
0 router renumbering
0 echo request
0 unreachable no route
0 unreachable beyond scope 0
0 unreachable no port
0 time exceed transit
redirect
0 other errors
153
0
0
0
0
0
0
0
0
0
0
0
0
0
0