Viewing Console Port, Ssh, And Telnet Handling Configurations - Cisco ASR1000-RP1 - ASR 1000 Series Route Processor 1 Router Software Configuration Manual

Chapter 8 Console Port, Telnet, and SSH Handling
Router(config-tmap)# rsa keypair-name sshkeys
Router(config-tmap)# authentication-retries 1
Router(config-tmap)# banner diagnostic X
Enter TEXT message.
--Welcome to Diagnostic Mode--
X
Router(config-tmap)#banner wait X
Enter TEXT message.
--Waiting for vty line--
X
Router(config-tmap)# time-out 30
Router(config-tmap)# transport interface gigabitethernet 0
Router(config-tmap)# exit
Router(config)# transport type persistent ssh input sshhandler

Viewing Console Port, SSH, and Telnet Handling Configurations

Use the show transport-map [all | name transport-map-name | type [console | persistent [ssh |
telnet]]] EXEC or privileged EXEC command to view the transport map configurations.
In the following example, a console port, persistent SSH, and persistent Telnet transport are configured
on the router and various forms of the show transport-map command are entered to illustrate the
various ways the show transport-map command can be entered to gather transport map configuration
information.
Router# show transport-map all
Transport Map:
Name: consolehandler
Type: Console Transport
Connection:
Wait option: Wait Allow Interruptable
Wait banner:
Waiting for the IOS CLI
bshell banner:
Welcome to Diagnostic Mode
Transport Map:
Name: sshhandler
Type: Persistent SSH Transport
Interface:
GigabitEthernet0
Connection:
Wait option: Wait Allow Interruptable
Wait banner:
Waiting for IOS prompt
Bshell banner:
Welcome to Diagnostic Mode
SSH:
OL-16506-10
Viewing Console Port, SSH, and Telnet Handling Configurations
End with the character 'X'.
End with the character 'X'.
Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide
8-11