Epson S1D13504 Technical Manual page 303

Epson Research and Development
Vancouver Design Center
Wind River UGL v1.2 Display Drivers
Wind River UGL v1.2 Display Drivers
Issue Date: 01/02/01
The Wind River UGL v1.2 display drivers for the S1D13504 Color Graphics LCD/CRT
Controller are intended as "reference" source code for OEMs developing for Wind River's
UGL v1.2. The drivers provide support for both 8 and 16 bit-per-pixel color depths. The
source code is written for portability and contains functionality for most features of the
S1D13504. Source code modification is required to provide a smaller, more efficient driver
for mass production.
The UGL display drivers are designed around a common configuration include file called
mode0.h which is generated by the configuration utility 13504DCFG. This design allows
for easy customization of display type, clocks, addresses, etc. by OEMs. For further infor-
mation on 13504DCFG, see the 13504DCFG Configuration Program User Manual,
document number X19A-B-008-xx.
This document and the source code for the UGL display drivers are updated as appropriate.
Please check the Epson Electronics America website at http://www.eea.epson.com or the
Epson Research and Development website at http://www.erd.epson.com for the latest
revisions before beginning any development.
We appreciate your comments on our documentation. Please contact us via e-mail at
documentation@erd.epson.com.
Page 3
S1D13504
X19A-E-003-02