Interfacing To The Pr31500/Pr31700 - Epson S1D13504 Technical Manual

Color graphics lcd/crt controller

Hide thumbs Also See for S1D13504:

Table of Contents

2 Interfacing to the PR31500/PR31700

X19A-G-005-08

The Philips PR31500/PR31700 processor supports up to two PC Card (PCMCIA) slots. It

is through this host bus interface that the S1D13504 connects to the PR31500/PR31700

The S1D13504 can be successfully interfaced using one of three configurations:

• Direct connection to PR31500/PR31700 (see Section 4, "Direct Connection to the

Philips PR31500/PR31700" on page 11).

• System design using one ITE8368E PC Card/GPIO buffer chip (see Section 5.1, "Hard-

ware Description—Using One IT8368E" on page 14).

• System design using two ITE8368E PC Card/GPIO buffer chips (see Section 5.2,

"Hardware Description—Using Two IT8368E's" on page 17).

Epson Research and Development

Interfacing to the Philips MIPS PR31500/PR31700 Processor

Vancouver Design Center

Issue Date: 01/02/02

Table of Contents