Epson S1D13504 Technical Manual page 287

Epson Research and Development
Vancouver Design Center
WINDOWS® CE DISPLAY DRIVERS
Program Requirements
Example Driver Builds
Build for the Hitachi D9000 and ETMA ODO Evaluation Systems
Windows® CE Display Drivers
Issue Date: 01/02/01
The Windows CE display drivers are designed to support the S1D13504 Color Graphics LCD/CRT
Controller running under the Microsoft Windows CE operating system. Drivers are available for 4,
8 and 16 bit-per-pixel modes.
For updated source code, visit Epson R&D on the World Wide Web at www.erd.epson.com, or
contact your Seiko Epson or Epson Electronics America sales representative.
Video Controller
Display Type
Windows Version
To build a Windows CE v2.0 display driver for the Hitachi D9000 or ETMA ODO platform follow
the instructions below. The instructions assume the S5U13504-D9000 evaluation board is plugged
into slots 6 and 7 on the D9000/ODO platform, and the SEIKO EPSON common interface FPGA
(ODO.RBF) is used to interface with the S1D13504.
Check to ensure that the DIP switches on the S5U13504-D9000 board are set as follows:
1
ON
1. Install Microsoft Windows NT v4.0.
2. Install Microsoft Visual C/C++ v5.0.
3. Install the Microsoft Windows CE Embedded Toolkit (ETK) by running SETUP.EXE from
the ETK compact disc #1.
4. Create a new project by following the procedure documented in "Creating a New Project
Directory" from the Windows CE ETK v2.0. Alternately, use the current "DEMO7" project in-
cluded with the ETK v2.0. Follow the steps below to create a "SH3 DEMO7" shortcut on the
Windows NT v4.0 desktop which uses the current "DEMO7" project:
a. Right click on the "Start" menu on the taskbar.
b. Click on the item "Open All Users" and the "Start Menu" window will come up.
c. Click on the icon "Programs".
d. Click on the icon "Windows CE Embedded Development Kit".
e. Drag the icon "SH3 DEMO1" onto the desktop using the right mouse button.
f. Click on "Copy Here".
: S1D13504
: LCD or CRT
: CE Version 2.0
DIP Switch
2 3
ON OFF
4
OFF
X19A-E-001-04
Page 3
S1D13504