Provisioning Settings; Provisioning Connectivity; Provisioning Externalmanager Address; Provisioning Externalmanager Alternateaddress - Cisco TelePresence SX10 Quick Set Administrator's Manual

Cisco TelePresence SX10 Quick Set

Introduction

Provisioning settings

Provisioning Connectivity

This setting controls how the device discovers whether it should request an internal or
external configuration from the provisioning server.
Requires user role: ADMIN, USER
Default value: Auto
Value space: Internal/External/Auto
Internal: Request internal configuration.
External: Request external configuration.
Auto: Automatically discover using NAPTR queries whether internal or external
configurations should be requested. If the NAPTR responses have the "e" flag, external
configurations will be requested. Otherwise internal configurations will be requested.

Provisioning ExternalManager Address

Define the IP Address or DNS name of the external manager / provisioning system.
If an External Manager Address (and Path) is configured, the device will send a message
to this address when starting up. When receiving this message the external manager /
provisioning system can return configurations/commands to the unit as a result.
When using CUCM or TMS provisioning, the DHCP server can be set up to provide the
external manager address automatically (DHCP Option 242 for TMS, and DHCP Option
150 for CUCM). An address set in the Provisioning ExternalManager Address setting will
override the address provided by DHCP.
Requires user role: ADMIN, USER
Default value: ""
Value space: String (0, 64)
A valid IPv4 address, IPv6 address or DNS name.
D15330.16 SX10 Administrator Guide CE9.9, OCTOBER 2019.
Configuration Peripherals Maintenance

Provisioning ExternalManager AlternateAddress

Only applicable when the device is provisioned by Cisco Unified Communication Manager
(CUCM) and an alternate CUCM is available for redundancy. Define the address of the
alternate CUCM. If the main CUCM is not available, the device will be provisioned by the
alternate CUCM. When the main CUCM is available again, the device will be provisioned by
this CUCM.
Requires user role: ADMIN, USER
Default value: ""
Value space: String (0, 64)
A valid IPv4 address, IPv6 address or DNS name.

Provisioning ExternalManager Protocol

Define whether to use the HTTP (unsecure communication) or HTTPS (secure
communication) protocol when sending requests to the external manager / provisioning
system.
The selected protocol must be enabled in the NetworkServices HTTP Mode setting.
Requires user role: ADMIN, USER
Default value: HTTP
Value space: HTTPS/HTTP
HTTPS: Send requests via HTTPS.
HTTP: Send requests via HTTP.
www.cisco.com — Copyright © 2019 Cisco Systems, Inc. All rights reserved.
143
Administrator Guide
Device settings Device settings Appendices