Collecting System Event Log For Investigation; Post Error Codes - Dell PowerEdge C2100 Hardware Owner's Manual

Servers
Hide thumbs Also See for PowerEdge C2100:
Table of Contents

Advertisement

Power Indicator
Yellow off
Blinks green
Table 1-9. Fault Indicator Codes
Fault Indicator
Blinks amber
Amber off

Collecting System Event Log for Investigation

If the front panel LED blinks for 30 to 60 seconds upon applying AC power to
the power supply, the baseboard management controller (iBMC) is
initializing. If not, then the iBMC is not functioning. If the iBMC is working,
try to gather system event log (SEL) information for investigation.

POST Error Codes

Code
Log in iBMC Error Message
0000 Yes
0003 Yes
18
About Your System
Timer Error
CMOS Battery
Low
Condition
Power supply is off or AC input
voltage is out of normal operating range
(90–264 VAC).
Standby power is on.
Condition
Host has critical or non-critical events
detected by iBMC, please check iBMC SEL
for details.
SEL is cleared or fail symptom has been
recovered. This failed LED will be turned
off in power off state.
Corrective Action
Remove AC power to the system for
10 seconds and restart the system.
If the problem persists, see "Getting
Help" on page 133.
See "Troubleshooting the System Battery"
on page 114.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents