Tape Drive Power Switches
The tape drives are behind the drive access door, inside the right side door of
the library. Each drive has a power switch that controls the power to only that
drive.
Note: The library's main power switch controls the AC power to the library
To remove power from a drive, push the drive switch to the "O" position.
To supply power to a drive, push the drive switch to the "|" position
Figure 2-19. Drive Power Switch Locations (C65131)
1
1. DLT or Ultrium drive power switch
2. 9840/T9840B/T9940 drive power switch
95845
and the drive column.
Tenth Edition
Tape Drive Power Switches
2
C65131
2-21