(6)
Remove one clip and then remove the shaft
of saddle harness frame.
(7)
Take off the saddle unit.
Notes:
•
Hold the part of the saddle unit as shown
in the figure during disassembling.
•
When the saddle unit was taken off, place
the unit on a flat place with its support
stored (flipped up).
© 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved
Fig. 4-74
Fig. 4-75
4 - 27
Shaft
Saddle harness
frame
Clip
Saddle unit
support
MJ-1103/1104
DISASSEMBLY AND INSTALLATION
4