Toshiba MJ-1104 Service Manual page 115

(4) Remove 3 screws, and then take off the
transport guide.
(5) Remove 1 E-ring, and then take off the front
transport roller by sliding the bushing.
Note:
Be sure not to lose the belt.
(6) Remove 1 clip, and then take off the rear
transport roller by sliding the bushing.
Note:
Be sure not to lose the belt.
© 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved
Fig. 4-129
Belt
Bushing
Fig. 4-130
Rear transport roller
Fig. 4-131
4 - 47
Transport guide
Front transport roller
Belt
Clip
Bushing
MJ-1103/1104
DISASSEMBLY AND INSTALLATION
4