Toshiba MJ-1104 Service Manual page 127

[B] Assisting roller
(1) Take off the switchback unit.
 P.4-28 "[B] Switchback unit"
(2) Remove 1 E-ring and take off the pulley and
belt.
(3) Remove 2 E-rings and take off the 2 bush-
ings and assisting roller.
[C] Ejecting roller
(1) Take off the assisting roller.
 P.4-59 "[B] Assisting roller"
(2) Remove the spring, and then loosen 2
screws to free the belt tension.
© 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved
Fig. 4-165
Clip
Bushing
Fig. 4-166
Fig. 4-167
4 - 59
Belt
Pin
Pulley
Assisting roller
Clip
Bushing
Spring
MJ-1103/1104
DISASSEMBLY AND INSTALLATION
4