(6)
Take off the upper folding roller while pulling
the jam access lever.
(7)
Remove 1 E-rings and take off the gear and
pin.
(8)
Remove 2 E-rings and take off the 2 bearing.
(9)
Remove 1 crip of the rear jam release lever.
MJ-1103/1104
DISASSEMBLY AND INSTALLATION
Gear
Bearing
© 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved
4 - 62
Jam release lever
Upper folding roller
Fig. 4-174
Pin
Fig. 4-175
Bearing
Clip
Fig. 4-176