Toshiba MJ-1104 Service Manual page 70

[B] Movable tray
(1) Remove 2 screws and slide the movable tray
obliquely upward to take it off.
Notes:
• When installing, hang the 4 hooks of the
movable tray on the holes of frame.
• When installing, engage the 2 holes of the
movable tray with the positioning dowels
of the main unit.
[C] Saddle tray
(1) Remove 2 screws, and then take off the lev-
eling arm.
Note:
When installing, engage the 2 holes of the
leveling arm with the positioning dowels of
the main unit.
(2) Remove the slide tray.
Note:
When installing, hang 1 hook of the sliding
tray on the hole of the saddle tray.
MJ-1103/1104
DISASSEMBLY AND INSTALLATION
Movable tray
Leveling arm
Sliding tray
© 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved
4 - 2
Fig. 4-3
Fig. 4-4
Fig. 4-5