Toshiba MJ-1104 Service Manual page 118

[F] Stack transport roller-1
(1) Take off the finishing tray unit.
 P.4-19 "[D] Finishing tray unit"
(2) Remove 3 screws, and then take off the front
finishing tray cover.
(3) Remove 3 screws, and then take off the rear
finishing tray cover.
(4) Remove 2 E-rings, and then take off the pin
and the stack transport roller-1.
MJ-1103/1104
DISASSEMBLY AND INSTALLATION
Rear finishing tray cover
Stack transport roller-1
Pin
© 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved
4 - 50
Front finishing tray cover
Fig. 4-138
Fig. 4-139
Stack transport roller-1
Pin
Fig. 4-140