Toshiba MJ-1104 Service Manual page 43

[B] Stack transport
A stacker carrier is moved to the stapling position or the folding position by the stacker motor (M14).
The home position of the stacker is detected by the stacker home position sensor (S33).
The presence of paper in the stacker is detected by the stacker paper detection sensor (S30).
[C] Side alignment
Stacks of paper transported to the stacker are aligned to fix their sideways deviation with a jog moved
by the side alignment motor (M15).
The home position of the jog is detected by the side alignment home position sensor (S36).
Jog
© 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved
Stacker paper detection sensor
Stacker carrier
Stacker home position sensor
Fig. 3-18
Side alignment motor
Fig. 3-19
3 - 15
Stacker motor
Jog
Side alignment
home position
sensor
DESCRIPTION OF OPERATIONS
3
MJ-1103/1104