Toshiba MJ-1104 Service Manual page 183

(3) Release the latch, and then take off the sad-
dle tray paper detection sensor.
[H] Stacker home position sensor (S33)
(1) Take off the stacker unit.
 P.4-37 "[H] Stacker unit"
(2) Move the stacker to the position where the
stacker home position sensor is seen.
(3) Release the latch, and then take off the
stacker home position sensor.
[I] Folding motor encoder sensor (S34)
(1) Take off the saddle unit.
 P.4-26 "[A] Saddle unit"
(2) Remove 1 screw, and then disconnect the
connector and take off the folding motor
encoder sensor.
© 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved
Saddle tray paper detection sensor
Fig. 4-326
Fig. 4-327
Fig. 4-328
4 - 115
Stacker guide
Stacker home
position sensor
Stacker guide
Folding motor
encoder sensor
MJ-1103/1104
DISASSEMBLY AND INSTALLATION
4