Toshiba MJ-1104 Service Manual page 49

[B] Bundle job offset mode/ stapling stack mode
START
Entrance motor ON
Exit motor ON
Entrance sensor ON?
YES
Transport sensor ON?
YES
Buffer roller lift solenoid ON
Buffer tray guide motor ON
Buffer tray home position sensor ON
Paper holding arm motor ON
Buffer roller drive motor ON (Reverse)
Catching solenoid ON
Buffer roller lift solenoid ON
Buffer tray guide motor ON
Buffer tray home position sensor ON
Patting solenoid ON
© 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved
Paddle home position sensor ON
Front alignment motor ON
Front alignment plate home position sensor ON
NO
Rear alignment motor ON
Paper jam
Rear alignment plate home position sensor ON
NO
Paper jam
Stapler unit home position sensor ON
Stapler Interference switch ON
Stapler Interference sensor ON
Paper exit guide clutch ON
Paper exit guide clutch ON
Stack exit belt home position sensor ON
Shutter opening/closing sensor ON
Movable tray shift motor ON
Movable tray paper-full sensor ON
Movable tray shift motor ON (Reverse)
Movable tray position sensor ON
Movable tray upper position sensor ON
Movable tray lower position sensor ON
Fig. 3-26
3 - 21
Paddle motor ON
Stapler unit shift motor ON
Stack transport motor ON
Finishing tray paper
detection sensor ON?
NO
Shutter clutch ON
Transport motor ON
End
DESCRIPTION OF OPERATIONS
Staple stack mode
YES
Paper jam
MJ-1103/1104
3