Motor (Saddle Section: Mj-1104) - Toshiba MJ-1104 Service Manual

4.7

Motor (Saddle section: MJ-1104)

[A] Stacker motor (M14)
(1) Take off the stacker unit.
 P.4-37 "[H] Stacker unit"
(2) Move the stacker to the upper position.
(3) Remove 1 E-ring, and then take off the
spring, belt and shaft by sliding the bushing.
Note:
Do not lose the removed bushing of the
shaft.
(4) Remove 1 E-ring, and then take off the
stacker.
(5) Remove 3 screws, and then take off the
motor bracket.
Note:
Do not lose the removed gear of the motor
bracket.
MJ-1103/1104
DISASSEMBLY AND INSTALLATION
© 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved
4 - 74
Spring
Belt
Bushing
Shaft
Bushing
Fig. 4-207
Stacker
Fig. 4-208
Motor bracket
Gear
Fig. 4-209