Toshiba MJ-1104 Service Manual page 79

(9) Release the harness out of one clamp, and
then take off the grate-shaped guide.
Note:
When installing the grate-shaped guide,
install the harness as shown in the figure.
[O] Left lower cover
[O-1] Left lower cover (MJ-1103)
(1) Take off the movable tray.
 P.4-2 "[B] Movable tray"
(2) Take off the front rail cover and rear rail
cover.
 P.4-9 "[M] Front rail cover / Rear rail
cover"
(3) Remove 4 screws, and take off the left lower
cover.
© 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved
Grate-shaped
guide
Fig. 4-29
Clamp Harness
Fig. 4-30
Left lower
cover
Fig. 4-31
4 - 11
Clamp
MJ-1103/1104
DISASSEMBLY AND INSTALLATION
4