4.5
Rollers (Saddle section: MJ-1104)
[A] Switchback transport roller
(1)
Take off the switchback unit.
P.4-28 "[B] Switchback unit"
(2)
Take off the saddle transport motor.
P.4-76 "[C] Saddle transport motor (M16)"
(3)
Open the jam transport guide.
(4)
Remove 3 screws and take off the feed knob
assembly, bushing and belt.
(5)
Remove 4 E-rings and take off the 1 pulley, 1
gear, 2 pins and 2 bushings.
(6)
Remove 4 screws and take off the transport
guide and switchback transport roller.
MJ-1103/1104
DISASSEMBLY AND INSTALLATION
Feed knob
Bushing
assembly
Belt
Bushing
Pin
Pulley
Switchback
transport roller
© 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved
4 - 58
Jam transport
guide
Fig. 4-162
Bushing
Pin
Gear
Fig. 4-163
Transport guide
Fig. 4-164