Toshiba MJ-1104 Service Manual page 145

[D] Folding motor (M17)
(1) Take off the saddle unit.
 P.4-26 "[A] Saddle unit"
(2) Release the harness out of 6 clamps, and
then disconnect each connector of CN4 on
the SDL board.
(3) Take off the belt of folding motor.
(4) Remove 2 screws and take off the folding
motor.
© 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved
Fig. 4-216
Belt
Fig. 4-217
Folding motor
Fig. 4-218
4 - 77
Clamp
SDL board
MJ-1103/1104
DISASSEMBLY AND INSTALLATION
4