Toshiba MJ-1104 Service Manual page 41

[E] Paper exiting operation
Bundles of the paper aligned or stapled on the finishing tray are then pulled up by the paper exit guide
driven by the stack transport motor (M8) with the turning ON of the paper exit guide clutch (CLT2).
Then the paper is exited by the paper exit belt driven by the stack transport motor (M8) and the stack
transport rollers-1 and -2 driven by the transport motor (M2) onto the movable tray.
The home position of the paper exit belt is detected by the stack exit belt home position sensor (S9).
Paper exit belt
Stack transport motor
© 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved
Stack transport roller-2
Paper exit guide
clutch
Stack exit belt
home position sen
Paper exit guide
Fig. 3-16
3 - 13
Transport motor
Stack transport roller-1
MJ-1103/1104
DESCRIPTION OF OPERATIONS
3