Toshiba MJ-1104 Service Manual page 33

[B] Paper exit to the stationary tray
Paper transported from the Finisher feeding section to the stationary tray side is exited to the stationary
tray with the stationary tray roller driven by the exit motor (M11).
The entrance sensor (S1) detects the paper transport to the stationary tray.
The stationary tray paper-full sensor (S18) detects the overload of paper on the stationary tray.
© 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved
Stationary
tray roller
Exit motor
Fig. 3-6
3 - 5
Stationary tray
paper-full sensor
Entrance sensor
DESCRIPTION OF OPERATIONS
3
MJ-1103/1104