Toshiba MJ-1104 Service Manual page 173

[S] Connection sensor (S25)
(1) Take off the right cover.
 P.4-7 "[K] Relay guide / Feeding dis-
charge brush / Right cover"
(2) Release the latch, and then disconnect the
connector to take off the connection sensor.
[T] Front cover switch (SW1)
(1) Open the front cover (MJ-1103) or the front
upper cover (MJ-1104).
 P.4-6 "[G] Rear cover"
(2) Remove 2 screws, and then disconnect the
connector and then take off the switch
bracket.
(3) Remove 2 screws, and then take off the front
cover switch.
© 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved
Fig. 4-296
Fig. 4-297
Front cover switch
Fig. 4-298
4 - 105
Connection sensor
Right cover
Switch bracket
MJ-1103/1104
DISASSEMBLY AND INSTALLATION
4