Toshiba MJ-1104 Service Manual page 117

(5) Remove 1 screw to take off the 1 gear and 1
pin.
(6) Remove 1 E-ring to take off the bushing.
(7) Remove 1 E-ring, and then slide 1 bushing.
Then take off the entrance roller.
(8) Remove 1 E-ring. Then remove 1 pulley, 1
bushing and 1 pin from the entrance roller.
© 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved
Gear Bushing
Pin
Fig. 4-135
Entrance roller
Fig. 4-136
Fig. 4-137
4 - 49
Entrance roller
Bushing
Bushing
Pulley
Pin
MJ-1103/1104
DISASSEMBLY AND INSTALLATION
4