Toshiba MJ-1104 Service Manual page 122

(8) Remove 1 E-ring. Then remove the shaft and
the spring to take off the tapping arm.
Note:
Install the tapping arm as shown in the fig-
ure.
(9) Move the buffer guide to both ends by push-
ing the buffer roller.
(10) Remove the spring and 2 E-rings. Then take
off the front buffer roller guide.
MJ-1103/1104
DISASSEMBLY AND INSTALLATION
Spring
Buffer roller
Front buffer roller guide
Spring
© 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved
4 - 54
Tapping arm
Shaft
Fig. 4-150
Buffer guide
Fig. 4-151
Fig. 4-152