Toshiba MJ-1104 Service Manual page 151

• Buffer roller lift solenoid
- Remove 2 screws, and then take off
the buffer roller lift solenoid.
• Patting solenoid
- Remove 2 screws, and then take off
the patting solenoid.
[G] Gate solenoid (SOL4)
(1) Take off the right upper cover.
 P.4-7 "[J] Right upper cover"
(2) Remove 2 screws, and then take off the front
bracket.
(3) Remove 2 screws, and then take off the rear
bracket.
(4) Remove 2 screws, and then take off the junc-
tion box upper transport guide.
© 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved
Fig. 4-234
Fig. 4-235
Front bracket Junction box upper
transport guide
Fig. 4-236
4 - 83
Buffer roller lift
solenoid
Patting solenoid
Rear bracket
MJ-1103/1104
DISASSEMBLY AND INSTALLATION
4