Toshiba MJ-1104 Service Manual page 143

(6) Remove 2 screws. Release the harness out
of 1 clamp, and then take off the stacker
motor.
[B] Side alignment motor (M15)
(1) Open the front upper cover and then pull out
the saddle unit.
(2) Remove 4 screws, and then take off the
upper safety cover.
(3) Remove 2 screws, and then disconnect the
relay connector to take off the side alignment
motor.
© 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved
Fig. 4-210
Fig. 4-211
Relay connector
Side alignment motor
Fig. 4-212
4 - 75
Stacker Motor
Clamp
Upper safety cover
MJ-1103/1104
DISASSEMBLY AND INSTALLATION
4