Download Print this page

Paper Jam In Additional Folding Section - Toshiba MJ-1104 Service Manual

Hide thumbs

Advertisement

Table of Contents
Is the harness between the folding motor encoder sensor (S34) and the CN11 of the saddle con-
trol PC board (SDL) disconnected or open circuited?
Is the harness between the folding motor (M17) and the CN14 of the saddle control PC board
(SDL) disconnected or open circuited?
l
YES
Reconnect the connector securely if there is any disconnection.
Replace the harness if open circuited.
NO
1. Replace the folding motor (M17).
2. Replace the saddle control PC board (SDL).
6.2.5

Paper jam in additional folding section

[EF18]
Saddle Stitch Finisher additional folding roller home position detection
error
Is there any mechanical problem when the additional folding carrier is moved?
YES
Fix the mechanism.
NO
Is there a disconnection of the connector, incorrect installation or breakage of the additional fold-
ing home position sensor (S39)?
l
YES
Reconnect the connector securely if there is any disconnection.
l
Reinstall the sensor correctly if there is any incorrect installation.
Replace the sensor if there is any breakage.
NO
Is the harness between the additional folding home position sensor (S39) or the additional fold-
ing motor encoder sensor (S42) and the CN19 of the saddle control PC board (SDL) discon-
nected or open circuited?
Is the harness between the additional folding motor (M20) and the CN18 of the saddle control
PC board (SDL) disconnected or open circuited?
l
YES
Reconnect the connector securely if there is any disconnection.
Replace the harness if open circuited.
NO
Replace the saddle control PC board (SDL).
[CB93]
Saddle Stitch Finisher additional folding motor (M20) abnormality
*The [CB93] error also occurs when the error [EF18] has occurred consecutively for 3
times.
Is there any mechanical problem when the additional folding carrier is moved?
YES
Fix the mechanism.
NO
Is the harness between the additional folding motor (M20) and the CN18 of the saddle control
PC board (SDL) disconnected or open circuited?
l
YES
Reconnect the connector securely if there is any disconnection.
Replace the harness if open circuited.
NO
1. Replace the additional folding motor (M20).
2. Replace the saddle control PC board (SDL).
MJ-1103/1104
TROUBLESHOOTING
© 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved
6 - 22

Hide quick links:

Advertisement

Table of Contents
loading

  Related Manuals for Toshiba MJ-1104

  Related Content for Toshiba MJ-1104

This manual is also suitable for:

Mj-1103