Toshiba MJ-1104 Service Manual page 123

(11) Remove 2 E-rings, 2 gears, 1 spacer and the
pin. Then take off the rear buffer roller guide.
(12) Remove the E-ring, and then take off the
shaft from the lift guide to take off the buffer
roller.
(13) Take off the lift guide from the buffer roller.
© 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved
Rear buffer roller guide
Spacer
Gear
Gear
Fig. 4-153
Lift guide
Shaft
Fig. 4-154
Lift guide
Buffer roller
Fig. 4-155
4 - 55
Pin
Buffer roller
MJ-1103/1104
DISASSEMBLY AND INSTALLATION
4