Download Print this page

Paper Jam In Folding Section - Toshiba MJ-1104 Service Manual

Hide thumbs

Advertisement

6.2.4

Paper jam in folding section

[EF19]
Saddle Stitch Finisher paper folding jam
Is there any paper remaining in the paper transport path in the equipment or the saddle stitch
section of the Finisher?
YES
Remove the paper.
NO
Is there a disconnection of the connector, incorrect installation or breakage of the exit transport
sensor (S41)?
l
YES
Reconnect the connector securely if there is any disconnection.
l
Reinstall the sensor correctly if there is any incorrect installation.
Replace the sensor if there is any breakage.
NO
Is the harness between the exit transport sensor (S41) and the CN19 of the saddle control PC
board (SDL) disconnected or open circuited?
l
YES
Reconnect the connector securely if there is any disconnection.
Replace the harness if open circuited.
NO
Replace the saddle control PC board (SDL).
[EF17]
Saddle Stitch Finisher folding blade home position detection error
Is there any mechanical problem when the folding blade cam is rotated?
YES
Fix the mechanism.
NO
Is there a disconnection of the connector, incorrect installation or breakage of the folding blade
home position sensor (S35)?
l
YES
Reconnect the connector securely if there is any disconnection.
l
Reinstall the sensor correctly if there is any incorrect installation.
Replace the sensor if there is any breakage.
NO
Is the harness between the folding blade home position sensor (S35) and the CN15 of the sad-
dle control PC board (SDL) disconnected or open circuited?
Is there a disconnection of the connector, incorrect installation or breakage of the folding blade
clutch (CLT3)?
l
Reconnect the connector securely if there is any disconnection.
YES
Replace the harness if open circuited.
NO
Replace the saddle control PC board (SDL).
[CBE0]
Saddle Stitch Finisher folding motor (M17) abnormality
* The [CBE0] error also occurs when the error [EF17] has occurred consecutively for 3
times.
Is there a disconnection of the connector, incorrect installation or breakage of the folding motor
encoder sensor (S34)?
l
YES
Reconnect the connector securely if there is any disconnection.
l
Reinstall the sensor correctly if there is any incorrect installation.
Replace the sensor if there is any breakage.
NO
© 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved
6 - 21
MJ-1103/1104
TROUBLESHOOTING
6

Hide quick links:

Advertisement

loading

  Related Manuals for Toshiba MJ-1104

  Related Content for Toshiba MJ-1104

This manual is also suitable for:

Mj-1103