Toshiba MJ-1104 Service Manual page 107

(9) Open the stationary tray.
(10) Remove the spring, and then loosen 2
screws to free the belt tension.
(11) Take off the belt.
(12) Remove one screw, and then sensor bracket
of feeding sensor.
(13) Push the jam access lever of the junction box
to the right side, and then open the transport
guide.
© 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved
Spring
Belt
Fig. 4-107
Sensor
bracket
Fig. 4-108
Jam access lever
Fig. 4-109
4 - 39
MJ-1103/1104
DISASSEMBLY AND INSTALLATION
4